Rotary Drilling Rig tare da Kulle bututu GR250
Halayen Aiki
1.Streamlined zane na dukan inji, gaye da kuma m, m aiki, barga yi, high kudin yi;
2.Babu buƙatar rushe bututun rawar soja, ana iya ɗaukar shi ta hanyar injin duka;
3.Steel caterpillar chassis kore ta biyu Motors, kananan juya radius;
4.Equipped tare da high-definition aiki allo, da verticality za a iya gyara da yardar kaina a cikin taksi;
5.The ikon shugaban yana da babban karfin juyi, da gear gudun za a iya canza bisa ga daban-daban geologic humanization ta dauko uku gears na high, tsakiya da kuma low gears;
6.Automated zurfin ganowa, sarrafa hakowa digiri a kowane lokaci.
7.Equips tare da m na'ura mai aiki da karfin ruwa tsarin, rike da yawan zafin jiki na man fetur al'ada ko da a lokacin zafi zafi.
Ƙididdiga na Fasaha
| Abu | Naúrar | Bayanai | |
| Suna | Rotary Drilling Rig tare da Kulle bututu | ||
| Samfura | GR250 | ||
| Max.Zurfin Hakowa | m | 25 | |
| Max.Diamita Hakowa | mm | 1400 | |
| Injin | / | Cummins 6BT5.9-C210 | |
| Ƙarfin Ƙarfi | kW | 153 | |
| Rotary Drive | Max.Fitar Torque | kN.m | 100 |
| Gudun Rotary | r/min | 17-35 | |
| Babban Winch | Ƙarfin Ƙarfi mai ƙima | kN | 60 |
| Max.Gudun igiya guda ɗaya | m/min | 50 | |
| Winch mai taimako | Ƙarfin Ƙarfi mai ƙima | kN | 15 |
| Max.Gudun igiya guda ɗaya | m/min | 30 | |
| Ƙaunar Mast Lateral / Gaba / Baya | / | ± 5/5/15 | |
| Silindar Ja-Ƙasa | Max.Ja-ƙasa piston tura karfi | kN | 80 |
| Max.Ƙarfin Pull na Piston mai saukarwa | kN | 100 | |
| Max.Fitar da bugun jini na Piston | mm | 3000 | |
| Chassis | Max.Gudun Tafiya | km/h | 2.5 |
| Max.Iyawar Daraja | % | 30 | |
| Min.Tsabtace ƙasa | mm | 360 | |
| Faɗin allo | mm | 600 | |
| Matsin Tsarin Aiki | Mpa | 32 | |
| Nauyin Inji (Bare Kayan Aikin Haki) | t | 26 | |
| Gabaɗaya Girma | Matsayin Aiki L×W×H | mm | 7150×2600×13100 |
| Matsayin Sufuri L×W×H | mm | 11100×2600×3500 | |
Bayani:
| |||
Aikace-aikace
Layin samarwa
